Substrate preparation
We removed construction debris and dust from the base and repaired local defects and gaps.
Overall view of the room after pouring the self-levelling floor.
Pouring the self-levelling compound in consecutive sections.
Level surface along the wall and balcony door.
Junction of the self-levelling layer with the column and adjacent base.
Continuous floor surface around the column after spreading the compound.
Self-levelling floor in Montenegro
We prepared the base and poured a self-levelling floor over an area of 23 m².
Materials and details
We used a dry self-levelling compound, compatible primer and repair compound. The layer thickness was determined by the variations in the base and the specified floor level.
Dry self-levelling compound.
Compatible primer for preparing the base.
Repair compound for local defects.
The layer thickness was determined by the variations in the base and the specified floor level.
Work progress
Base cleaning and local repairs, priming, mixing the compound, pouring and rolling with a spiked roller.
Priming and setting the level
We primed the surface, checked the variations and set the pour level.
Mixing the compound
We mixed the dry compound with a construction mixer using a measured amount of water.
Pouring
We poured the compound in consecutive sections without long pauses.
Spreading the layer
We spread the compound with a wide trowel, rolled it with a spiked roller and left the layer to gain strength.
