Wall preparation
We levelled the wall surfaces and formed the internal corners at 90°.
Overall view of the finished shower area with a linear drain.
Vertical installation of light tiles on the bathroom walls.
Olive and light tiling inside the shower area.
Finished two-tone bathroom wall tiling.
Clinker tile bathroom in Pržno
We prepared the bathroom in Pržno and tiled 25 m² of walls and floor with 50×150 mm clinker tiles. The work included waterproofing, underfloor heating and a levelling pour.
Materials and details
The walls were tiled vertically with 50×150 mm clinker tiles: light tiles below and olive tiles in the upper section. A linear drain was installed in the shower floor.
50×150 mm clinker tiles.
Light tiles in the lower section and olive tiles in the upper section.
Vertical tile layout on the walls.
Linear drain in the shower floor.
Underfloor heating and a levelling pour.
Work progress
From wall levelling and waterproofing to underfloor heating, levelling the base and installing clinker tiles.
Waterproofing
We waterproofed the wet area before installing the tiles.
Service openings
We drilled openings for electrical fittings and connections.
Floor preparation
We installed underfloor heating, poured a self-levelling compound and levelled the base.
Tiling
We laid 50×150 mm clinker tiles on the walls and floor, finished the shower area around the linear drain and grouted the joints.
